Generally speaking, vehicle equipment such as self loading mixers have a layer of paint on their surface, which is designed to provide better protection and aesthetic appearance for the vehicle. During normal operation, the paint is easily damaged, so this is a method of protecting the paint from damage from the self loading mixer. If you do not like the painted surface of the self priming mixer, the metallic paint will crack very little and continue to penetrate into the paint layer until it penetrates into the entire paint layer.

如果裂縫中含有蠟，則身體會變得斑紋。定期打蠟可以逐漸減少裂紋。當暴露在陽光下時，自上料攪拌機會不斷蒸發，以保護空氣中的油。隨著時間的流逝，油漆油將變得過度分散。涂漆表面的亮度和深度將大大降低，涂漆表面將逐漸變白，將形成氧化層，并縮短涂層壽命。如果自動進料混合器的涂漆表面被嚴重氧化，則可以通過研磨和拋光進行處理。同時盡量把自上料攪拌機停放在車庫內，停車的時候不要有強陽光暴曬，減少雨淋。

If the cracks contain wax, the body can become mottled. Regular waxing can gradually reduce cracks. When exposed to sunlight, the self feeding mixer continuously evaporates to protect the oil in the air. Over time, the paint oil will become excessively dispersed. The brightness and depth of the painted surface will be greatly reduced, and the painted surface will gradually become white, forming an oxide layer, and shortening the coating life. If the painted surface of the automatic feed mixer is severely oxidized, it can be treated by grinding and polishing. At the same time, try to park the self loading mixer in the garage. When parking, do not expose it to strong sunlight to reduce rain.

自上料攪拌機的表面磨損。它可能是由昆蟲，禽糞，樹液，柏油或瀝青引起的。一些小的蝕刻可以通過研磨和拋光解決。除了上述方法之外，為了有效地防止油漆濺到車輛上，在駕駛時必須注意駕駛此外使用后注意緊固件是否松動，并及時緊固。所有攪拌機均采用工作通道，緊固件應及時檢查。

The surface of the self feeding mixer is worn. It may be caused by insects, bird droppings, tree sap, tar, or asphalt. Some small etchings can be solved by grinding and polishing. In addition to the above methods, in order to effectively prevent paint from splashing onto the vehicle, attention must be paid to driving. In addition, after use, attention must be paid to whether fasteners are loose and tightened in a timely manner. All mixers are equipped with working passages, and fasteners should be inspected in a timely manner.

攪拌機減速箱使用一段時間后，檢查其潤滑油位的凹凸情況，并及時補償查詢孔處可見的油質為30#的機械油。潤滑油是機械設備的重要組成部分。如果潤滑油沒有及時補償，可能會導致傳動部件磨損，因此必須及時檢查潤滑油。并避免碰撞和摩擦。否則，會發生其他損壞。

After using the mixer reducer for a period of time, check the concavity and convexity of its lubricating oil level, and promptly compensate for the 30 # mechanical oil visible at the inquiry hole. Lubricating oil is an important component of mechanical equipment. If the lubricating oil is not compensated in time, it may lead to wear of transmission components, so it is necessary to check the lubricating oil in a timely manner. And avoid collisions and friction. Otherwise, other damage may occur.

更多的關于自動上料混凝土攪拌車問題或者詳細的內容，請進入我們公司的網站：http://www.dbo1084.com網站中會有很多的內容僅供參考。

For more questions or detailed information about automatic loading concrete mixer trucks, please visit our company's website: http://www.dbo1084.com There will be a lot of content on the website for reference only.