自動上料攪拌車的維護要注意什么!

 來源:http://www.dbo1084.com 日期:2023-03-27 發布人:admin
小型攪拌車門的自動加載以及焊接實際都是粘在密封條上,這也是保證密封的操作。不然,這些縫隙很簡單被外面的風沙沙粒填滿,引起腐蝕等。檢查小型攪拌車密封是否有大的裂縫。今天,我想與您分享密封條的日常維護。
The automatic loading and welding of the small mixer door are actually adhered to the sealing strip, which is also an operation to ensure sealing. Otherwise, these gaps can easily be filled with sand particles from the outside, causing corrosion, etc. Check the seal of the small mixer for large cracks. Today, I would like to share with you the daily maintenance of the sealing strip.
1.查看自動上料攪拌車的密封件是否有大的裂縫。如果密封破損,可以使用粘合劑修正。特別是,在密封件上使用粘合劑能夠輕松填充較大的裂縫區域。當然,如果密封件嚴重損壞或老化程度很大,請替換新的密封件。
1. Check whether the seal of the automatic loading mixer truck has large cracks. If the seal is broken, it can be corrected using adhesive. In particular, using adhesive on seals can easily fill large crack areas. Of course, if the seal is severely damaged or aging is significant, please replace it with a new seal.
2.在駕駛員用混凝土混合清潔劑清潔門窗密封條之后,應涂一層滲透防護劑,從而避免密封條老化,并明顯提高了密封條的密封作用。另外,密封條之間的空隙很容易充滿塵埃和銹蝕。為此,您需要使用刷子鏟除塵埃。
自動上料混凝土攪拌車
After the driver cleans the door and window sealing strips with concrete mixed detergent, a layer of penetration protection agent should be applied to avoid aging of the sealing strips and significantly improve the sealing effect of the sealing strips. In addition, the gap between the sealing strips is easily filled with dust and rust. To do this, you need to use a brush to remove dust.
3.替換整個機身時,有必要在焊接部分的堆疊部分涂一層密封劑。粘合劑層的厚度約為1mm,而且粘合劑層必須沒有不適當的粘合,氣泡和其他缺點。地板的整個底面和前輪蓋的底面應涂3mm-4mm的彈性涂層和防腐涂層。這些措施不只明顯進步了車身的密封功用,減緩了車身的腐蝕速度,而且大大進步了乘坐舒適性。
When replacing the entire fuselage, it is necessary to apply a layer of sealant to the stacked portion of the welded portion. The thickness of the adhesive layer is approximately 1 mm, and the adhesive layer must be free of improper adhesion, bubbles, and other defects. The entire underside of the floor and the underside of the front wheel cover should be coated with a 3mm to 4mm elastic coating and anti-corrosion coating. These measures not only significantly improve the sealing function of the vehicle body, slow down the corrosion rate of the vehicle body, but also greatly improve ride comfort.
4.密封門和車身是一個相對困難的部分。密封要求相對嚴厲。需要密封的部分相對較長,要密封的部分的橫截面形狀不相同,而且門常常被翻開和關閉。在混凝土攪拌車上安裝三通四通密封墊,并在安裝前支柱和頂梁側梁的四密封結構。這種類型的多通道密封一般放置在前門之間的空隙中,除了具有密封功用外,還具有減少車輛噪音的效果。
Sealing the door and vehicle body is a relatively difficult part. Sealing requirements are relatively strict. The parts to be sealed are relatively long, the cross-sectional shapes of the parts to be sealed are different, and the doors are often turned over and closed. Install the three-way and four-way sealing gasket on the concrete mixer truck, and install the four-way sealing structure of the front pillar and top beam side beam. This type of multi-channel seal is generally placed in the gap between the front doors. In addition to its sealing function, it also has the effect of reducing vehicle noise.
感謝您的閱讀,此文的文章來源:自動上料混凝土攪拌車更多的內容和問題請點擊:http://www.dbo1084.com我們會繼續努力的為您提供服務,感謝您的支持!
Thank you for reading. The source of this article is: Automatic Feeding Concrete Mixer. For more information and questions, please click: http://www.dbo1084.com We will continue to work hard to provide you with services, thank you for your support!